0333 038 4321 sales@recoveryworld.co.uk
Navigation
  • 0
    • 0
    < Back to New Vehicles

    RW40A Aluminium Slidebed

    Vehicle Info

    The RW35A aluminium slidebed body is built for hard work, designed for the 7.5 ton to 15ton chassis range and with its lightweight body gives a great payload delivering an impressive capacity from 3.5 ton to 6ton but with the interlocking floor planks makes this a very strong piece of equipment.

    The strong platform comes in a range of lengths & has great versatility with its fishtail platform end, giving an excellent loading angle enabling safe loading of most sports/high performance vehicles.

    RW40A 4000kg Slidebed Design & Construction :

  • Aluminium Platform
  • Body length up to 21’ (6.4m) approx, depending on chassis wheelbase
  • Galvanised beacon flyer (twin upright posts ‘H’ style frame & mounted in the centre of the body either side of the winch)
  • Large plastic chassis mounted locker
  • 8 deck mounted lashing rings
  • Chassis body locks

    • Electrics :

  • 2 rotator light bar with illuminated centre
  • 1 pair of flyer mounted work lamps

    • Hydraulics :

  • PTO pump cab mounted air switch
  • Chassis mounted hydraulic tank with filter
  • 8000lb hydraulic winch
  • Twin tilt body rams
  • 12ft slide off ram
  • Lockable valve spool cabinet
  • Winch control

    • General :

  • 1 set of transporter
  • Body shot blasted, primed and finished in single colour of customer’s choice
  • Subrame shot blasted, primed and paint to match chassis
  • 1 years structural warranty
  • 1 year mechanical warranty

    • Options :

  • Independent 1500 kg capacity second car lift shot blasted & painted
  • Independent 1500 kg capacity second car lift zinc passivated
  • Galvanised slidebed subframe
  • Winch radio remote
  • Radio remote holder with micro switch and buzzer
  • Rear LED stop/tail/indicator lamps
  • Side winching capstons
  • Detachable 50mm towball
  • 4 Rotator light bar with illuminted centre section ( Evolution series)
  • 1 pair of spec mounted work lamps
  • Deluxe flyer
  • Pivot in bed platform for increased loading angle
  • Aluminium side under run bars
  • Strobe light bar
  • Front mounted stobes
  • LED rear facing lamp clusters
  • Red LED marker lights mounted on flyer
  • Side skirts with built in lockers and painted in single colour
  • Full operation radio remote
  • Aluminium Low approach ramps
  • Additional plastic locker
  • Steel locker instead of plastic
  • Additional steel locker
  • Wrecker kit (broom, shovel, cones, small & large crow bar)
  • Cones & carrier
  • 12V jump socket front & rear with jump leads
  • 12 & 24V Jump sockets front & rear with jump leads
  • Reel Smart winch system
  • Lighting board with fog light storage brackets
  • Wheel buggie galvanised storage with 1 pr of buggies
  • Go-Jack & Buggies skate ramp galvanized
  • 7 pin electrics with 12V dropper
  • Jerry can and storage
  • Paint Cab Only, single solid colour (7.5/10ton GVW)
  • Paint Chassis Only, single solid colour (7.5/10ton GVW)
  • Four round LED lights at rear via smart resister.
  • 3 x Second generation strobes fitted in front grill.
  • Chrome Wheel Trims, price based on chassis

    • Enquire about this Vehicle

    0844 335 1270 info@recoveryworld.co.uk

    Type Approval

    All our vehicles are subject to Whole Vehicle Type Approval which is an area of EU legislation that applies to the standards of all new recovery vehicles manufactured or sold in the EU. Recovery World works closely with all the relevant authorities (VOSA, VBRA, VCA etc) to ensure that all our new vehicles comply with the latest version of this legislation.

    Vehicle finance available

    We have worked with an independent finance company for a number of years, they have helped many of our customers obtain finance, and whilst they are independent from us, we are happy & confident to recommend their service.