RW60 Steel Slidebed

Vehicle Info

The Recovery World steel slidebed range is a rugged and effective work horse designed for the 7.5ton – 26ton tonne chassis range and delivering capacity from 3.5 ton – 12ton.

The ultra strong platform comes in a range of lengths with its fishtail end (RW35-RW60 only) giving an excellent loading angle that enables most sports/high performance vehicles to be safely loaded.

With increased durability and longevity of the product by galvanizing the flyer, rear light bar and platform tip before painting, areas that are subject to wear and damage from stone chips, making them vulnerable to rust.

An additional feature to this range is the option of a top deck enabling the operator to carry a second vehicle or even third if a second car lift is included on the vehicle. There is a further option of a flat lying top deck.

6000kg Slidebed Design & Construction :

All steel body with welded treadplate flooring

Body length up to 7m (23’1”) x 2.5m (8’3”) approx, depending on chassis wheelbase

Galvanised beacon flyer twin upright posts ‘H’ style frame

Body side raves with aluminium capping

Large chassis locker

8 deck mounted lashing rings

Chassis body locks

Electrics :

2 rotator light bar with illuminated centre

1 pair of flyer mounted work lamps

Hydraulics :

PTO pump cab mounted air switch

Chassis mounted hydraulic tank with filter

8000lb hydraulic winch

Twin tilt body rams

12ft slide off ram

Lockable valve spool cabinet

Winch control

General :

1 set of transporter

Body shot blasted, primed and finished in single colour of customer’s choice

Subrame shot blasted, primed and paint to match chassis

1 years structural warranty

1 year mechanical warranty

Options :

Independent 1500 kg capacity second car lift shot blasted & painted

Independent 1500 kg capacity second car lift zinc passivated

Galvanised slidebed subframe

Winch radio remote control

Radio remote holder with micro switch and buzzer

Side winching capstons

Detachable 50mm towball

4 rotator light bar with illuminated centre (evolution series)

1 pair of spec mounted work lampsp

Deluxe flyer

Wider body with tapered front section (2330 wide instead of 2200 wide)

Pivot in bed platform for increased loading angle

Aluminium side under run bars

Strobe light bar

Front mounted stobes

LED rear facing lamp clusters

Red LED marker lights mounted on flyer

Side skirts with built in lockers and painted in single colour

Full operation radio remote

Aluminium Low approach ramps

Additional plastic locker

Steel locker instead of plastic

Additional steel locker

Wrecker kit (broom, shovel, cones, small & large crow bar)

Cones & carrier

12V jump socket front & rear with jump leads

12 & 24V Jump sockets front & rear with jump leads

Reel Smart winch system

Lighting board with fog light storage brackets

Wheel buggie galvanised storage with 1 pr of buggies

7 pin electrics with 12V dropper

Jerry can and storage

Paint Cab Only, single solid colour (7.5/10ton GVW)

Paint Chassis Only, single solid colour (7.5/10ton GVW)

Flat approach 2nd platform option including:

Twin lifting cylinders

Platform elevation channels

Pneumatic piston locks controlled via switch located at the control box

Aluminium side and centre trims

Front and rear rollers

Painted black, top and underside

Winch rope friction trim

8ton Capacity body

Hydraulic load bearing tailgate

Four round LED lights at rear via smart resister.

3 x Second generation strobes fitted in front grill.

Chrome Wheel Trims, price based on chassis

Video Gallery